DTD Control Series
DTD-1ED-SLAVE/PRO-LED | DTD-2ED-SLAVE/PRO-LED
Two dimmer models, a slave version and a programmable master, combined with different power and amperage. CBM (DTD-1) and CBM (DTD-2) the only devices specially designed for dimming CBM 120, 230V LED lamps from 0.2% to 100% without flashing / flickering.
Advanced lighting regulator for two-color LEDs
With its touch screen, the LUMIX offers you an intuitive and very simple interface. This light controller allows you to control the light intensity as well as the two-color red and white, based on lux and kelvin demand number measured by its light sensor, on a schedule that can go up to 24 periods of 24 steps. The LUMIX has 2 10 Amps lighting outputs compatible with American and European standards (120V/240V, 50Hz/60Hz) and an alarm relay.
|1||LED touch screen with push button|
|2||1 zone dimmer – 10amp (2200W)|
|3||Module with 8 climbs and 8 descents per day|
|4||Dimmable by transistor mode|
|5||1,200 Vac protection against peak voltage|
|6||Dimmable from 0.2% to 100% without flashing with (CBM luminaire)|
|7||2 years warranty (against any manufacturing defect)|
|8||Potentiometer: low level adjustment screw|
|9||Selectable operation at the beginning or end of the phase|
© 2020 All Rights Reserved